Powerplus POWXG7201 CULTIVATOR 1200W EN - Manual (Page 10)

POWXG7201
EN
Copyright © 2015 VARO P a g e | 10 www.varo.com
 Take off the damaged tine and replace with the new one.
11.5 Checking transmission lubricant (Fig. 7)
Drain screw plug (1) is located on the right side of transmission housing.
 Lay the tiller on its left side and clean the transmission to prevent dirt and debris before
remove the drain screw.
 Using a hex key 5mm to unscrew the plug and empty the oil from the transmission.
 Fill up by using a grease gun with a high-quality, amtomotive-grade grease until it begins
to seep out around the edge of the hole of the nozzle.
 If necessary, disassemble tines.
 Reinstall the drain screw plug.
12 STORAGE
The tiller should be stored in a dry and clean room and out of reach of children.
During extended periods of storage, during the winter for example, ensure that the application
is protected against corrosion and frost.
At the end of the season, or if the application is not to be used for longer than a month:
 Clean the application.
 Wipe over all metal surfaces with an oil-impregnated cloth to protect them from corrosion
(non-resinous oil), or spray a fine coat of oil onto them from a can.
 Fold the guide bar down, and store it in a suitable place.