Powerplus POWXG3016 BRUSH CUTTER 42,7CC EN - Manual (Page 7)

POWXG3016
EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
8 ASSEMBLY
8.1 Bike handle installation
Install the U-handle on the fixing holder, install the
clamp and fasten with the screws.
8.2 Installation protection guard
 Remove the 2 screws from the guard.
 Position the guard so it can be fixed into
place with the clamp and the screws.
 Tighten the screws
8.3 Installing the harness
 Adjust the harness hanger in a
comfortable position
 Buckle the harness at the hanger
8.4 Replace the metal blade to spool
CAUTION: NEVER use unit if blade is warped or has teeth that are chipped or
missing. Replace a damaged blade immediately.
CAUTION: Always wear heavy-duty work gloves when handling and installing
a blade.
8.4.1 Disassembly metal blade
 Align the hole on the gear box to the slot on the flange washer
 Use the pin to go through the hole and slot, and hold the flange washer
 Loose the nut and remove the metal blade and cup washer
Harness hanger Harness
Thread cutter