Assembly instructions, Safety guard assembly, Auxiliary handle assembly – Powerplus POWXG3006 GRASS TRIMMER 800W EN User Manual
Page 6: Tube assembly, Support of the trimmer body

POWXG3006/POWXG3007
EN
Copyright © 2010 VARO
P a g e
| 6
www.varo.com
7
ASSEMBLY INSTRUCTIONS
The trimmer is supplied with some components which need to be assembled. Please
proceed as follows:
7.1
Safety guard assembly
Attacht the safety guard with the screws applied.
Warning: The safety guard must be attached in the correct direction.
7.2
Auxiliary handle assembly
Attach the auxiliary handle to the trimmer body
support.
Rotate the lock button to tighten the auxiliary
handle.
A) Lock button
B) Trimmer body support
7.3
Tube assembly
Insert the tube into the hole. (1)
Rotate the lock button to tighten the tube. (2)
Support of the
trimmer body
This manual is related to the following products: