Powerplus POWXG3006 GRASS TRIMMER 800W EN - Manual (Page 11)

POWXG3006/POWXG3007 EN
Copyright © 2010 VARO P a g e | 11 www.varo.com
12 INSTRUCTIONS FOR USE
 Start the trimmer before approaching the grass to be cut.
 Cut the grass by moving the trimmer from right to left and proceed slowly, keeping trimmer
inclined about 30 degrees .High grass should be cut in layers, always beginning from the
top .The cuts should be short.
 Do not cut damp or wet grass.
 Avoid wearing the line out quickly by knocking against hard objects (stone, walls, fences
etc) .Use the edge of the guard in order to keep the trimmer at the right distance.
Warning: Do not use excessive force or hit the trimmer bump head on the
ground to reel out the cutting line. If the cutting line does not reel out after
tapping the bump head on the ground while the trimmer is running, it may
have become entangled, may have disappeared within the cartridge or may
have to be replaced.
NOTE: The use of excessive force or hitting the trimmer bump head on the
ground to reel out the cutting line will damage the bump head.
Warning: The cutting head continues to rotate for a few seconds after motor
is switched off.
13 EXTENSION CORDS
You should only use PVC ordinary duty extension cords for outdoor use with a diameter of at
least 0.75mm.
Before using, check supply and extension cords for signs of damage, and disconnect the
cords if they are damaged or ageing. If the cord is damaged when in use, disconnect the
cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worn.
Keep extension cords away from cutting elements.
Warning: Always ensure that the ventilation openings are kept clear of
debris.
14 TECHNICAL DATA
POWXG3006 POWXG3007
Rated voltage 230-240V~ 230-240V~
Rated frequency 50Hz 50Hz
Rated Power 800W 1000W
No load speed 7000min
-1
7500min
-1
Cutting width 320mm 350mm
Line size Φ1.6mm Φ1.6mm
Cutting system 2 lines/tap and go 2 lines/tap and go
Weight 4.0kg 4.2kg