Powerplus POWXG2015 HEDGE TRIMMER 25,4CC 600MM EN - Manual (Page 4)

POWXG2015 EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the
tool.
Wear a mask In dusty conditions
Read manual before use
Never operate the machine in the
rain or in damp or wet conditions.
Moisture is an electrical shock
hazard.
Wear noise protection Wear gloves
Wear eye protection Wearing of protective shoes advised
In accordance with
essential safety standards
of applicable European
directives
No smoking
No naked flame Fuel and oil mixture
Keep hands away from blades. Do not touch the blades when starting or while
operating the unit.
5 GENERAL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings
and instructions may result in electric shock, fire and/or serious injury. Save
all warnings and instructions for future reference.
5.1 Work area
 Keep work area clean and well lit. Cluttered and dark areas invite accidents.
 Do not operate tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
 Keep children and bystanders away while operating a tool. Distractions can cause you to
lose control.
5.2 Personal safety
 Stay alert, watch what you are doing and use common sense when operating a tool. Do
not use a tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating tools may result in serious personal injury.
 Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used whenever conditions require
will reduce personal injuries.
 Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying tools with your finger on the switch or plugging in tools that have the switch on
invites accidents.