Powerplus POWX154 B ENCH DRILL 500W EN - Manual (Page 3)

POWX154
EN
Copyright © 2013 VARO P a g e | 3 www.varo.com
BENCH DRILL 500W
POWX154
1 APPLICATION
Your bench drill has been designed for drilling holes in wood, metal and plastics.
It is not designed for commercial use.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION
1. On/off switch
2. Motor housing
3. Stand
4. Storage
5. Table
6. Chuck
7. Safety guard
8. Drill lift
9. Depth stop
10. Laser on/off switch
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Bench drill
1 x working table
1 x base plate
1 x pole
1 x protective cover
3 x drill depth wheel ball
2 x nut
2 x hex key
1 x check 1 x key
1 x gear
2 x handle
1 x ring for installing pole
1 x wrench
1 x MT2 shaft
1 x stick for unload chuck
1 x manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read manual before usage Wear eye protection.
Warning / Danger Laser beam warning