Eton Elite E100 - Manual (Page 21)

19
8 SYSTEM SET CODES AND THE SYSTEM SET
CODE TABLE continued
E100 OWNER’S MANUAL E100 OWNER’S MANUAL
CHANGING SYSTEM SET CODES
To enter a system code of your choice, use the procedure below.
1. Turn off the radio.
2. Press/release the ‘Sys. Set’ button (13). Note that ‘- - ‘ (41)
appears in the upper right corner of the display and the clock
digits disappear.
3. Within 5 seconds, enter the desired numeric code with the
numeric key pad, then immediately press/release the button
labeled ENTER. The code ICON (42) will briefly appear in the lower
right corner of the display.
CHANGING THE CLOCK FROM 24 TO 12 HOUR
FORMAT – AN EXAMPLE OF CHANGING A SYSTEM SET CODE
The instructions below serve as an excellent example of how to
change a system set code, in this case changing the clock system to
a 12 hour format:
1. Turn off the radio.
2. Press/release the ‘Sys. Set’ button. Note that ‘- - ‘ appears in the
upper right corner of the display and the clock digits disappear.
CODE
NO.
DESCRIPTION
SHOWN IN
DISPLAY
Normal AAA battery to be used 1.5
Set the FM frequency range to 76-108MHz (Japan) 76 108
Set the FM frequency range to 87-108MHz 87 108
(N. America; Western Europe)
29*
76*
88*