Powerplus POWX134 MULTITOOL 180W +100ACC EN - Manual (Page 8)

POWX134
EN
Copyright © 2013 VARO P a g e | 8 www.varo.com
7.3.6 Cutting disc
Pic 10
 Use: Cutting or slitting bolts, screws ,
sheet metal, thin wood and plastic.
7.3.7 Orbital sander
Pic 11
 Use: Sanding , smoothing and shaping
wood and fiberglass.
7.4 On / off switch
Always check that the power supply corresponds to the voltage on the rating
plate.
Pic 12
 Turning on: Turn the power button to position I
 Turning off:Turn the power button to position O
7.5 Setting the speed
Pic 13
 The multi tool speed is continuously adjustable.
Always start from the lowest speed and then
increase the speed to the desired level.
 “+” denotes the higher speed
 “-” denotes the lower speed