Powerplus POWX1152 HAMMER DRILL 1250W EN - Manual (Page 2)

POWX1152
EN
Copyright © 2014 VARO NV P a g e | 2 www.varo.com
HAMMER DRILL 1250W
POWX1152
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone, as well as for light
chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
It is not designed for commercial use.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION(FIG.1)
1. Dust cap
2. Fastening sleeve
3. Auxiliary handle
4. Oil cover
5. Hammer stop
6. Drill stop
7. AVS system (Anti Vibration System)
8. On/off switch
9. Depth stop
10. Handle
11. Carbon brush cover
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
 Hammer drill 1250W
 Depth stop
 Auxiliary handle
 Keyless chuck + adaptor
 Dust cap
 Set of spare cole brushes
- 3 SDS drills Ø8-10 & 12 x 150mm
- SDS point chisel: 250mm
- SDS flat chisel: 22 x 250mm
When parts are missing or damaged, please contact your dealer.