Powerplus POWX1020 HEAT GUN 2000W EN - Manual (Page 2)

POWX1020
EN
Copyright © 2014 VARO NV P a g e | 2 www.varo.com
HEATGUN
POWX1020
1 APPLICATION
Your heat gun has been designed for stripping paint, soldering pipes, shrinking PVC, welding
and bending plastics as well as general drying and thawing purposes.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
Do not use the tool in an environment with flammable liquids, gases or
dust. Power tools produce sparks that could ignite such dust or fumes.
2 DESCRIPTION (FIG A)
1. On/off switch (0/ low /high)
2. Air vents
3. LCD display
4. Nozzle
5. Temperature adjust knob
6. Adjustment dial of air flow
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 Heat gun
1 Stainless steel triangular scraper
1 Instruction manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read manual before use
"Class II - The machine is
double insulated; Earthing wire
is therefore not necessary
In accordance with essential
requirements of the European
directive(s)
Denotes risk of personal injury
or damage to the tool.