beautypg.com

Cleaning, Technical data, Noise – Powerplus POWX046 BELT SANDER 950W EN User Manual

Page 6: Service department, Storage

background image

POWX046

EN

Copyright © 2013 VARO

P a g e

| 6

www.varo.com

8.1

Cleaning

 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.

9 TECHNICAL DATA

Mains voltage /frequency

230V/ 50Hz

Power rating

950W

No load speed

200-380 m/min

belt size

533x76mm

Sanding surface

140x75mm

Weight

3.6kg

10 NOISE

Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA

86 dB(A)

Acoustic power level LwA

96 dB(A)

ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.

aw (Vibration)

3,7 m/s²

K = 1.5 m/s²

wear suitable eye, respiration, hand & hearing protection when working

11 SERVICE DEPARTMENT

 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular

connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).

12 STORAGE

 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry

place, avoid too high and too low temperatures.

 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.