Powerplus POWX019 IMPACT WR ENCH 18V EN - Manual (Page 8)

POWX019
EN
Copyright © 2011 VARO P a g e | 8 www.varo.com
7.1 Installing or removing socket:
§ Always be sure that the tool is switched off and the battery pack is removed before
installing or removing the socket.
§ To install the socket, push it onto the anvil of the tool until it locks into place. To remove
the socket, simply pull it off.
8 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
8.1 Cleaning
§ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
§ Regularly clean the machine housing with a soft cloth, preferably after each use.
§ Keep the ventilation slots free from dust and dirt.
§ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9 TECHNICAL DATA
Rated Voltage DC (Un) 18V=
Rotation speed 0-2200 min
-1
Socket type ½”
Max Torque : 130 Nm
Battery capacity 1700mAh
Charging Time 1 hour
Batter charger 230-240V – 50Hz, Output: 18Vdc – 2A
10 SOUND EMISSION
Noise emission values measured according to relevant standard.
Sound pressure level 95 dB(A) K=3
Sound power level 106 dB(A) K=3
ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
Vibration aw 10.1 m/s² K=1.5
11 SERVICE
§ Use only identical replacement parts.
§ Follow instructions in the maintenance section of this manual.
§ Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of
shock or injury
12 STORAGE
§ Thoroughly clean the whole machine and its accessories.
§ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.