Powerplus POWX0030LI SCREWDRIVER 3,6V LI-ION + LED LIGHT EN - Manual (Page 6)

POWX0030LI
EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
7.5 LED work-light
Pushing the operating button will turn on the LED work-light.
Leaving the operating button will switch off the LED work-light.
7.6 The torch
There is a torch in the end of the machine. The torch produces a light beam that emerges
from the lamp head (10).
To start the torch, push the switch (11) to “ON” position
To turn off, push the switch (11) to “OFF” position)
7.7 Screw insertion
Set the direction of rotation of the screwdriver to the clockwise direction. Insert the screw-bit
into the slot in the head of the screw. Hold the screw bit perpendicular to the head of the
screw, otherwise the screw or the screw head may be damaged. Press the screw bit against
the screw with a constant pressure while driving in the screw.
When the screw is completely screwed in, hold the machine firmly and
release the On/Off trigger, otherwise the screw or the screw head may be
damaged. If the On/Off trigger is not released immediately a high torque
could also damage the screw-bit or the screwdriver.
7.8 Screw removal
Set the direction of rotation of the screwdriver to the anticlockwise direction. Insert the screw-
bit into the slot in the head of the screw. Hold the screw-bit perpendicular to the head of the
screw, otherwise the screw or the screw head may be damaged. Press the screw bit against
the screw with a constant pressure while removing the screw.
8 CLEANING AND MAINTENANCE
8.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
 Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
8.2 Maintenance
Attention! Always switch off the screwdriver and lock the switch in the OFF position before
carrying out any work on the machine.
9 TECHNICAL DETAILS
Model nr. POWX0030LI
Rated voltage 3.6V
No
– load speed
180 rpm
Battery capacity 1300 mAh
Charging time 3
– 5 hours