Powerplus POW751 PAINT SPRAY GUN 100W EN - Manual (Page 9)

POW751 EN
Copyright © 2012 VARO P a g e | 9 www.varo.com
8.2 Lubrication
The machine requires no additional lubrication.
9 TECHNICAL SPECIFICATIONS
Voltage 230V
Frequency 50Hz
Power input 100W
Maximum nozzle flow rate 280 ml/min
Container capacity 900 ml
Nozzle diameter 0.6 mm / 0.8 mm / 1 mm
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 72 dB(A)
Acoustic power level LwA 85 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) 7.6m/s² K = 1.5 m/s²
11 TROUBLE SHOOTING
11.1 Motor hums but does not spray or irregular spraying
 Worn swirl head.
Replace swirl head.
 Pick up pipe not in the right position
Re-adjust pick up pipe.
 Blocked pick up pipe.
Clean with thinner.
 Blocked nozzle
Clean nozzle.
 Blocked filter
Clean with thinner.
 Control knob needs adjustment
Adjust.
11.2 Atomization is not good.
 Volume adjustment is not correct.
Adjust.
 Paint too thick
Check viscosity of the paint