Stop engine, 4 in 1, 1” mowing with the grass catch box – Powerplus POW63777 LAWNMOWER 173CC 530MM EN User Manual
Page 9: 2” mowing without the grass catch box, 3” convert to mulching mower, Mounting mulching wedge
POW63777
EN
Copyright © 2014 VARO
P a g e
| 9
www.varo.com
We also should put more fuel to mix with air for easy start. When you push the prime button, it
will pump the fuel direct from carburetor to burning housing.
Note: In cold condition it may be necessary to repeat priming steps.
8.7
Stop engine
To stop engine, release operating/ safety handle.
Warning: the blade will continue to rotate for a few seconds after the engine
has stopped. Disconnect the spark plug cap if the lawn mower is to be left
unattended.
9
“4 IN 1”
It can easily be converted depending on the application purpose:
Normal lawnmower with rear discharge using the grass collect box.
Normal lawnmower with rear discharge, without using the grass collect box.
As mulching machine.
As lawnmower with side discharge.
9.1
“1” Mowing with the grass catch box
For mowing with the grass catch box :
Lift the discharge flap and mount the grass collect box.
Regularly clean the rear flap and discharge opening from grass residue and stuck dirt.
9.2
“2” mowing without the grass catch box
You can also use the mower without the grass catch box:
Normal lawnmower with rear discharge.
Regularly clean the rear flap and discharge opening from grass residue and stuck dirt.
9.3
“3” convert to mulching mower
What is mulching?
Mulching means the grass is cut & chopped in one working cycle and is left on the
lawnsurface as a natural fertilizer.
Hints for mulch-mowing:
Regular cut-back by max .2 cm (for example from 6 cm to 4 cm grass height)
Make sure the mowing blade is sharp
Do not mow wet grass
Set max. Motor speed
Move forward at low speed (allow mower to chopp grass in mower housing)
Regularly clean mulching wedge, housing inner side and mowing blade.
9.3.1 Mounting mulching wedge
Make sure the motor stopped and blade has come to a complete standstill!!
Lift the discharge flap and remove the grass collect box.
Push the mulching wedge into the discharge channel. Lock the mulching wedge with
housing (the nose on the bottom side of the mulching wedge grip must snap into the
opening in the housing.
Lower the discharge flap again.