Powerplus POW6127 HEDGE TRIMMER 22.5CC 600MM EN - Manual (Page 13)

POW6127 EN
Copyright © 2010 VARO P a g e | 13 www.varo.com
12 STARTING UP AFTER LONGER PERIODS OF INACTIVITY
Remove the sparking plug.
Quickly pull the starter cord right through several times in order to remove oil and deposits
in the engine compartment.
Check the sparking plug, replace it if necessary and screw it in.
Fill the petrol tank with the 2-stroke mixture.
13 TECHNICAL DATA
Engine Type Air-cooled, -2-cycle power stroke engine
Engine displacement 22.5cc
Double blade cutting
Cutting length 520mm
Overall length 600mm
Cutting speed 2000r/min
Cutting capacity 21mm
Knife distance 20mm
Output power 650W
Engine oil / petrol mixed ratio 1:25
Starter type Recoil starter
Fuel tank capacity 650ml
14 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or by
a qualified specialist (qualified electrician).