Powerplus POW6016 GRASS TRIMMER 500W 300MM EN - Manual (Page 6)

POW6016 EN
Copyright © 2013 VARO P a g e | 6 www.varo.com
7.2 Guiding wheel assembly
Align the wheels on both sides and put
them to the sides of the houding
Secure it by the screw
7.3 Auxiliary handle assembly
Rotate the bracket (8) to the foreside of the handle.
Put the auxiliary handle on the bracket and adjust the angle to a comfortable position.
Lock it by the rotating button (7).
8 OPERATION
8.1 Starting
To switch on the trimmer first press the On/Off trigger (5). To switch off simply release the
On/Off switch trigger(5)
If you find that the nylon line is too short, let the trimmer run for a few seconds without
touching the working area to allow the trimmer to cut the line after it lengthens.
Do not overload the trimmer, cut in small sections which will greatly improve efficiency by
keeping the trimmer running at high speed,
Use the edge of the guard as a guide when cutting near fences and walls, etc.
8.2 Adjust the telescopic length
Make sure the height of the trimmer is in the most comfortable position before use. Adjust
the height as follows:
Loosen the function collar (12)
Pull/push the tubes to a comfortable length
Tighten the function collar (12)
8.3 Adjust the cutting angle
Push the push button (14) and then rotate the tube to a comfortable position and release
the button as you hear the ‘click’ sound.