Powerplus POW5623 AIR COMPRESSOR 12V EN - Manual (Page 6)

POW5623
EN
Copyright © 2013 VARO P a g e | 6 www.varo.com
Because the pressure gauge is not calibrated, and therefore can give no absolutely reliable
pressure measurement, the tire pressure should always be checked using a proper tyre
pressure gauge, before you drive on the tires.
8.5 Inflating bicycle tires
Before inflating a bicycle tire that has a regular valve, first screw the adapter onto the tyre
valve. Then place the air pump on the adapter or twist the pneumatic hose onto the adapter.
For a bicycle tire with a “car tire valve”, for example, on a mountain bike, place the pump
directly on the valve.
8.6 Inflating other items
To pump up other items, use either the ball adapter or the airbed adapter.
9 CLEANING AND MAINTENANCE
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
10 TECHNICAL DATA
POW5623
Motor voltage 12 V
battery Ni-Cd, 12 V - 1300mAh
Max. Pressure 8 bar -116 PSI
Weight (including battery ) 1.3kg
Power supply 230-240V/50Hz
Rated charging voltage 14 V
Rated voltage of chargeable battery 12 V
Charging time : 3 - 5 hours
Current of charge 450 mA
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 83 dB(A)
Acoustic power level LwA 94 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration): 2.4 m/s² K = 1.5 m/s²