Collecting the dust, Technical data, Noise – Powerplus POW4001 PALM SANDER 135W EN User Manual
Page 6: Cleaning and maintenance, Service department
POW4001
EN
Copyright © 2015 VARO
P a g e
| 6
www.varo.com
7.3
Collecting the dust
For a better dust extraction of the working surface, your sanding machine can be connected to
the ordinary vacuum cleaner for house-use.. Use the supplied dust extraction connector.
8
TECHNICAL DATA
Power rating
135W
Mains voltage
230V
Mains frequency
50Hz
Sanding surface
140 x 140 x 80mm
No load speed
13.000 min
-1
Safety class
II
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
80 dB(A)
Acoustic power level LwA
91 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
6.3 m/s²
K = 1.5 m/s²
10 CLEANING AND MAINTENANCE
The machine does not require any special maintenance.
For safe and efficient working, always keep the machine and the ventilation slots clean.
Always be sure that the tool is switched off and unplugged before carrying out any work on
the tool.
11 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
- POW30002 IMPACT DRILL 500W EN (9 pages)
- POWAIR0802 PNEUMATIC DRILL/SCREWDRIVER EN (9 pages)
- POWAIR0014 PNEUMATIC SANDBLASTING GUN EN (12 pages)
- POWAIR0020 PNEUMATIC TOOL SET 5PCS EN (7 pages)
- POWAIR0106 PAINT SPRAY GUN 750CC 750CC EN (9 pages)
- POWAIR0110 PAINT SPRAY GUN 1000CC EN (8 pages)
- POWAIR0310 PNEUMATIC STAPLER/NAILER EN (8 pages)
- POWAIR0340 PNEUMATIC NAILER EN (8 pages)
- POWAIR0311 PNEUMATIC STAPLER/NAILER EN (8 pages)
- POWAIR0805 PNEUMATIC MULTI-USE TOOL EN (10 pages)
- POWAIR0806 PNEUMATIC STAPLER/NAILER EN (7 pages)
- POWX1345 MULTI-USE TOOL 300W EN (9 pages)
- POWXQ5235 DRILL/SCREWDRIVER 18V LI-ION 2 BATT EN (12 pages)
- POWXQ5107 ANGLE GRINDER 2450W 230MM EN (12 pages)
- POWXQ5107 ANGLE GRINDER 2450W 230MM EN (12 pages)
- POWXQ5203 IMPACT DRILL 850W EN (11 pages)
- POW462 WELDING MACHINE 160A EN (10 pages)
- POWXQ5220 HAMMER DRILL 520W EN (10 pages)
- POWXQ5226 HAMMER DRILL 1250W EN (9 pages)
- POWXQ5234 IMPACT DRILL 18V EN (13 pages)
- POWXQ5243 DRILL/SCREWDRIVER 12V LI-ION 2 BATT EN (13 pages)
- POWXQ5406 BELT SANDER 1200W EN (8 pages)
- POWXQ6110 HEAT GUN 2000W ELECTRONIC EN (11 pages)
- POWXQ5502 ELECTRIC PLANER 800W EN (10 pages)
- POW1010 JIGSAW 450W EN (8 pages)
- POW1015 JIGSAW 650W EN (8 pages)
- POW1520 ELECTRIC PLANER 600W EN (10 pages)
- POW4014 FINISHING SANDER 135W EN (8 pages)
- POW4060 ROTATING SANDER 480W EN (9 pages)
- POW1820 MULTITOOL 135W EN (10 pages)
- POW204 ANGLE GRINDER 500W 115MM EN (10 pages)
- POW2040 ANGLE GRINDER 500W 115MM EN (9 pages)
- POW2085 ANGLE GRINDER 710W 115MM EN (9 pages)
- POW2086 ANGLE GRINDER 900W 125MM EN (11 pages)
- POW30000 IMPACT DRILL 500W EN (16 pages)
- POW222 WALL SLOTTER 1700W EN (9 pages)
- POW30001 IMPACT DRILL 500W EN (8 pages)
- POW30050 IMPACT DRILL 710W EN (7 pages)
- POW30070 IMPACT DRILL 600W EN (7 pages)
- POW30080 IMPACT DRILL 1050W EN (7 pages)
- POW30075 IMPACT DRILL 750W EN (7 pages)
- POW302 B ENCH DRILL 350W EN (10 pages)
- POW30540 HAMMER DRILL 400W EN (8 pages)
- POW30543 HAMMER DRILL 900W EN (8 pages)
- POW30580 DEMOLITION HAMMER 1600W EN (10 pages)