Operating instructions, Switching on-off, Attaching the sandpaper – Powerplus POW4001 PALM SANDER 135W EN User Manual
Page 5

POW4001
EN
Copyright © 2015 VARO
P a g e
| 5
www.varo.com
Take special care when sanding lead based paint:
All persons entering the work area must wear a mask specially designed for protection
against lead paint dust and fumes.
Children and pregnant women must not enter the work area.
Do not eat, drink or smoke in the work area.
Do not leave the tool running. Operate the tool only when hand-held.
Ventilate your work area adequately when you perform sanding operations.
Be sure that there are no cracks or breakage on the pad before use. Cracks or breakage
may cause a personal injury.
7
OPERATING INSTRUCTIONS
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings, ..).
7.1
Switching On-off
Press On-off switch I/O
7.2
Attaching the sandpaper
Select sandpaper with the correct grain size. Make
sure the perforations in the paper coincide with
those on the sanding base plate.
The sandpaper should rest flush on the base plate
and must not come loose.
You can be sure to find the right sandpaper
among our product range (see technical
specifications).