Powerplus POW2040 ANGLE GRINDER 500W 115MM EN - Manual (Page 7)

POW2040 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
10 CLEANING & MAINTENANCE
10.1 Service
 Only qualified specialist personnel and original replacement parts should be used for
repairs. This will ensure that your device remains safe.
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
10.2 Cleaning
 Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth
moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
10.3 Lubrication
The machine requires no additional lubrication.
11 TECHNICAL SPECIFICATION
type POW2040
Voltage 230-240V~
Frequency 50 Hz
Power input 500 W
No-load speed 11500/min
-1
Disc diameter 115 mm
Spindle dimension M 14
Weight 1.42 kg
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 82 dB(A)
Acoustic power level LwA 93 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) 6.4 m/s² K = 1.5 m/s²
13 WARRANTY
 This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
 This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.