Powerplus POW2040 ANGLE GRINDER 500W 115MM EN - Manual (Page 2)

POW2040 EN
Copyright © 2014 VARO P a g e | 2 www.varo.com
ANGLE GRINDER 500W 115MM
POW2040
1 APPLICATION
This machine is developed for grinding and roughing of metal and stone. With help of the
correct accessories the machine can also be used for brushing and sanding.
It is not designed for commercial use.
WARNING Read this manual carefully before using the machine, for your
own safety. Your power tool should only be passed on with these
instructions.
2 DESCRIPTION (FIG.1)
1. ON/OFF-switch
2. Guard
3. Side handle
4. Grinding disc (NOT INCLUDED)
5. Spindle lock
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 Angle grinder
1 Side handle
1 Spanner 1 Set carbon brushes
1 Instruction manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
In accordance with essential
applicable safety standards of
European directives
Wear safety glasses and ear
protection
Class II machine – Double
insulation – You don’t need any
earthed plug.
Read instructions carefully
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual