Powerplus POWXQ5243 DRILL/SCREWDRIVER 12V LI-ION 2 BATT EN - Manual (Page 7)

POWXQ5243 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
7.3 Torque adjustment ring (2)
The drill has a torque adjustment ring. It allows you to select the desired torque depending on
the task you have to perform (drill / different types of screws into different materials). The
proper setting depends on the type of material and the size of screw you are using.
7.4 On/off switch (5)
The switch trigger can be locked in the OFF position. This feature helps reduce the possibility
of accidental starting when not in use.
FORWARD/REVERSE SELECTOR (RIGHT/LEFT ROTATION SELECTOR)
The drill has a forward/reverse selector located above the switch trigger.
 F(Forward) (Forward): Press selector on right side of machine (to the left side): drill turns
right (forward, fasten screws)
 R(Reverse) (Reverse): Press selector on left side of machine (to the right side): drill turns
left (reverse/ loosen screws)
7.5 Speed selector (3)
Your cordless drill has a two-speed gear, designed for drilling or driving at LO or HI speed. A
slide switch is located on top of your drill to select either LO or HI speed.
7.6 LED light (8)
Your cordless drill is equipped with an LED light at the front (above the ON/OFF switch).
above the battery pack
7.7 TPR soft grip
 Your cordless drill is equipped with TPR soft grip and protective parts. TPR
(Thermoplastic rubber) is elastic, chock absorbing and environmental friendly (recyclable).
8 (PRE)OPERATION
8.1 Battery charging
Use only the battery charger supplied with your tool. Only these battery chargers are matched
to the lithium ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery in the battery charger before
using your power tool for the first time. The lithium ion battery can be
charged at any time without reducing its service life. Interrupting the
charging procedure does not damage the battery.
8.2 Charging indication
The charger has two LED light (red and green). The green one
is the power indicator.
When the charger is plugged in, this will light up.