Powerplus POWXQ5234 IMPACT DRILL 18V EN - Manual (Page 11)

POWXQ5234 EN
Copyright © 2012 VARO NV P a g e | 11 www.varo.com
 Never store batteries in discharged condition. Recharge them immediately after
they are discharged.

Batteries gradually lose their charge, the higher the temperature the quicker, so
If you store your tool for longer periods of time without using it, recharge the
batteries every month or two. This will prolong battery life.
13 TECHNICAL DATA
Model No. POWXQ5234
Chuck 13 mm keyless
Power supply 18 Volt DC
Gear Train 2-Speed
No Load Speed
0-470/0-1800 min
-1
Clutch 25 Positions
Charger input 230 V 50 Hz
Charger Rate 1 hour
Torque 40 Nm (MAX.)
Battery Pack Model POWXQ5234B
Battery Type NiMh
Battery capacity 2500 mAh
14 SOUND EMISSION
Noise emission values measured according to relevant standard. (K=3)
POWXQ5234
LpA (Sound pressure level) 86 dB(A)
LwA (Sound power level ) 97 dB(A)
The machine may exceed 85 dB(A) at the workplace. In this case, noise
protection measures need to be introduced to protect the user.
POWXQ5234
Vibration (a
w
) : 6.07 m/s² K= 1.5 m/s²
15 WARRANTY
 This product is warranted for a 5-year period effective from the date of purchase by
the first user.
 This warranty covers all material or production flaws. It does not include defective
parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or
accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting
from maltreatment, accidents or alterations; nor the cost of transportation.
 This warranty covers all material or production flaws, excluding batteries, chargers,
defective parts subject to normal wear and tear such as, in particular, bearings,
brushes, cables, plugs… Accessories such as drills, drill bits, saw blades etc. also do
not fall under this warranty.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
 Repairs may only be carried out by an authorised customer service centre for
Powerplus tools.