Powerplus POWXG6025 LAWNMOWER 190CC 550MM EN - Manual (Page 10)

POWXG6025
EN
Copyright © 2013 VARO P a g e | 10 www.varo.com
CAUTION: Do not at any time make any adjustment to lawnmower without
first stopping the engine and disconnecting the spark plug wire.
CAUTION: before changing mowing height, stop mower and disconnect
spark plug cable.
Your gasoline lawnmower is equipped with a central height adjustment lever offering 6 height
positions
 Stop mower and disconnect spark plug cable before changing mower cutting height.
 The central height adjustment lever offers you 6 different height positions.
 To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down
to selected height.
 All wheels will be in the same height of cut.
7.13 Mowing tips
 Under certain conditions, such as very tall grass, it may be necessary to raise the height of
cut to reduce pushing effort and to keep from overloading the engine and leaving clumps
of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn
mower over the area a second time.
 For extremely heavy cutting, reduce the width of cut by over lapping previously cut path
and mow slowly.
 Pores in cloth grass catchers can become filled with dirt and dust with use and catchers
will collect less grass. To prevent this, regularly hose catcher off with water and let dry
before using.
 Keep top of engine around starter clear and clean of grass clippings and chaff. This will
help engine air flow and extend engine life.
8 MAINTENANCE INSTRUCTIONS
IMPORTANT - Regular, careful maintenance is essential for keeping the safety level and
original performance of the machine unchanged in time.
 Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
Regular maintenance is essential for safety and performance
 Never store the equipment with fuel in the tank inside a building where fumes can reach
an open flame ,a spark or a source of extreme heat.
 Allow the engine to cool before storing in any enclosure.
 To reduce the fire hazard, keep the engine; exhaust silencer, battery compartment and
petrol storage area free of grass, leaves, or excessive grease. Do not leave containers
with grass cuttings in doors.
 Replace worn or damaged parts for safety. For reasons of safety, do not use the
equipment with worn or damaged parts. Parts are to be replaced and not repaired. Parts
that are not of the same quality can damage the equipment and be dangerous for your
safety.
 If the fuel tank has to be drained, this should be done outdoors and when the engine is
cool.
 Wear strong work gloves when removing and reassembling the blade.
 Check the blade's balance after sharpening.
 Check the self-closing guard and grass-catcher frequently for wear and deterioration.
 Whenever the machine is to be handled, transported or tilted you must:

wear strong working gloves;

grasp the machine at the points that offer a safe grip, taking account of the weight and its
distribution.