Powerplus POWXG7510 LAWN SCARIFIER 1700W EN - Manual (Page 5)

POWXG7510
EN
Copyright © 2012 VARO P a g e | 5 www.varo.com
5.2 Wheel and handle
 Remove the scarifier from the packaging. Assembly 4 wheels into 4 supporters in deck
and fasten them tightly with the screws and grommets supplied .
 Connect the connecting pipe to deck
 Insert the nuts in the plastic handwheels supplied. Slide the hook for the extension cable
onto the handle pipe and attach the handle pipe to the connecting pipe using the round-
headed screws supplied
 Fasten the cable leading from the switch-plug combination to the motor along the
connecting pipe using the cable clips supplied.
5.3 Adjusting the cutting height
 Six different cutting depth settings are available.
 The desirable height can be got through changing the position of rocker for each wheel.
 Four wheels should be at the same level.
5.4 Grass collection bag
 Open the back cover, connect the catcher with deck through 2 hooks at the catcher.
5.5 Strain-relief hook for extension cable
 In order to avoid the inadvertent removing of extension cable from the plug-switch
combination, please be sure to put the extension cable through the hook correctly.
6 BEFORE USING THE TOOL FOR THE FIRST TIME
6.1 Starting the scarifier
 Before you start scarifying, make sure the cutting tools and their fasteners are neither
blunt nor damaged in any way. If necessary, replace any blunt or damaged cutters.
 Pull out the power plug before checking.
 To prevent the scarifier being started inadvertently, the switch-plug combination is fitted
with a safety pressure switch which must be depressed before the switch lever can be
pulled.
 When the switch lever is released, the safety pressure switch has to return to its starting
position.
 Make sure the extension cable is not within range of scarifier blade.
 Depress the safety pressure switch and pull the switch lever.
 Before you start scarifying, practice this operation a few times to ensure that everything
functions properly.
 Before carrying out any adjustments or repairing work on your scarifier, wait until the blade
stops rotating.;
 Always disconnect the power plug before carrying out any adjustment, maintenance and
repair work.
7 OPERATION
7.1 Cutting the grass
 Select a cutting height to suit the actual height of the grass.
 Avoid scarifying in situations in which the extension cable cannot be freely moved.
 To avoid clogging of the ejector opening and unnecessary overloading of the motor, push
the machine in a suitable speed and not too fast.
 Avoid working in the rain or on the wet grass.
7.2 The blade
 Always disconnect the power plug and check on the run-on display that the motor is off
before you inspect the blade.