Powerplus POWXG7203 CULTIVATOR 148CC EN - Manual (Page 8)

POWXG7203
EN
Copyright © 2012 VARO P a g e | 8 www.varo.com
Max. rotational speed 3000 min-1
Cutting width 400mm
Blade thickness 3,0mm
Motor Power 2,21kW
Oil Tank Capacity 600ml
Fuel tank capacity 800ml
10 SOUND EMISSION
Noise emission values measured according relevant standards
Noise power level LWA
80 dB(A) K = 3 dB(A)
Noise power level LPA 93 dB(A) K = 3 dB(A)
ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
aw (Vibration) : 6.5 m/s² K = 1.5 m/s²
11 MAINTENANCE AND STORAGE
11.1 Cultivator Maintenance
 The transmission case has grease installed at the factory. We recommend checking the
grease level every month. DO NOT overfill.
 Keep all screws, nuts, and bolts tight.
 For cold weather operation, store the unit in a cool environment. Transferring the unit from
a warm to a cold place can cause the build up of harmful condensation.
11.2 Engine Maintenance
Please follow engine operator ’s manual to maintain the engine.
11.3 Long Term Storage
If your cultivator will not be used for more than one month, prepare it for long term storage.
 Drain the gasoline in the fuel tank and carburettor.
 Check oil. Remove the spark plug, add a little oil into the cylinder, fit spark plug, rotate the
crankshaft and let oil be well-distributed in the inside surface of the cylinder.
 Pull the starter rope slowly until you feel resistance, tie a knot to fix the rope, then close
the air valve to keep out the dust and other pollutants.
 Remove all debris from cultivator tines and engine.
 Store cultivator in a clean and dry place.
12 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department. If the connecting
cable (or mains plug) is damaged, it must be replaced by a special connecting cable which is
available from our service department. Replacement of the connecting cable should only be
carried out by our service department or by a qualified specialist (qualified electrician).
13 WARRANTY
 This product is warranted as provided by law for a 36 months period effective from the
date of purchase by the first user.
 This warranty covers all material or production flaws. It does not include defective parts
subject to normal wear & tear such as bearings, brushes, cables, and plugs, or