Powerplus POWAIR0311 PNEUMATIC STAPLER/NAILER EN - Manual (Page 4)

POWAIR0311 EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
3. Place strip of nails or staples into the magazine with the
point resting on the fastener guide. Do not load with
trigger depressed.
4. Push upper magazine back until magazine lock latches.
5. Keep the nailer pointed away from yourself and others
and connect to the hose.
6. Position the nailer nose against work piece and pull the
trigger
7. Disconnect air supply in case a nail or stapler is jammed
8. Pull the grease shaft and pull the upper part of the nailer
nose open the magazine in the front. Remove jammed
nails or staples and close the front cover.
9. Keep the tool pointed away from yourself and others and
connect back to the hose.
6 LUBRICATION
An automatic in-line filter-regulator-lubricator is recommended (Fig 1) as it increases tool
life and keeps the tool in sustained operation. The in-line lubricator should be regularly
checked and filled with air tool oil.