Powerplus POWXQ5223 HAMMER DRILL 1500W EN - Manual (Page 3)

POWXQ5223 EN
Copyright © 2014 VARO NV Page | 3 www.varo.com
ROTARY HAMMER 1500W
POWXQ5223
1 APPLICATION
Your hammer drill can be universally used for hammer drilling and chiseling in stone and
concrete, and also for drilling in wood and metal.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. Depth gauge
2. Auxiliary handle knob
3. Front mode selector
4. Lubrication cap
5. Trigger switch
6. Rear mode selector
7. Auxiliary handle
8. SDS chuck
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packaging and packing inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING! Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
1 Rotary hammer
1 Manual
1 set of carbon brushes
1 auxiliary handle
1 depth gauge
1 grease cup 1 dust cap
1 spanner
1 x 13 mm chuck + SDS adapter + key
3 SDS drill bits: Ø8, 10 & 12mm x 150mm
2 SDS chisels 14x250mm (1 flat 22mm +
1 pointed)
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Read manual before use. Wear noise protection.
Denotes risk of personal
injury or damage to the tool.
Class II - The machine is double
insulated; Earthing wire is
therefore not necessary.