Electro-Voice Zx1i-90 - Manual (Page 5)

Electro-Voice ® Zx1i Owner’s Manual 5
Step-by-Step Installation and Wiring
Step 1: Mount the SAM™ Bracket to Mounting Surface
70°
90°
Figure 3: Vertical Mounting Figure 4: Horizontal Mounting
Figure 5: 70° Rotation Range Figure 6: 90° Sweep Range
WARNING: It is the installer’s responsibility to ensure that the
mounting surface is stable and can support more than the
speaker’s weight!
Use only industry-accepted fasteners and mounting methods when mounting the
bracket. Consult an expert if you are not sure. Read steps 2 and 3 before attaching the
speaker in step 4. For standard vertical installation mount the SAM™ bracket as shown
in Figure 3. For horizontal mounting configurations, mounting the bracket on the bottom
side (as in Figure 4) is easiest, allowing the speaker to be mounted closer to the ceiling.