Emerson Radio ES11 - Manual (Page 12)

1 1
LISTENING TO THE RADIO
1.) Press the ON/OFF button on the front panel or the remote control to turn the
system ‘On’. The main display lighting comes on.
2.) Press the TUNER button on the main unit or remote to select
the Tuner function. An AM or FM frequency will appear on
the display.
3.) Press the BAND button on the main unit or remote to switch
between the AM and FM bands if necessary.
4.) Tune to the desired station as follows:
• Manual Tuning
Repeatedly press the DOWN or UP button on the
front panel or remote until the desired frequency appears
on the display. If you tune to an FM Stereo station the
“STEREO” indicator appears in the display.
• Automatic Tuning
Depress and hold the DOWN or UP button on the
front panel or remote until the display begins to move,
then release the buttons. The tuner will search for the next
strong station and stop on the station. Repeat this
procedure until the display stops on your desired station.
5.) Adjust the VOLUME “+/–“ and PRESET EQ controls as desired.
6.) When you are finished listening press the ON/OFF button on the main unit or
remote to shut the system ‘Off’. The main display lighting goes off and the time
appears again.
ES11_ib022503.p65 25/2/2003, 16:05 11