Excell Precision XC2600 - Manual (Page 12)

12- ENG A20116
TO USE GATLING™ SPRAY
WAND
The nozzles for the spray wand are
stored in the gatling spray wand. See
chart to choose the correct nozzle for
the job to be performed.
CHANGING NOZZLES ON SPRAY
WAND
Risk of fl uid
injection. Do not
direct discharge stream toward
persons, unprotected skin, eyes or
any pets or animals. Serious injury
will occur.
Risk of fl uid
injection. Do Not
attempt to change nozzles while
pressure washer is running. Turn
engine off before changing nozzles.
0º 15º 40º Soap
Spray Pattern
Uses powerful
pinpoint for
very intense
cleaning intense
cleaning of
small areas intense
cleaning of
larger areas applies
cleaning
solutions
Surfaces * Metal or
concrete
DO NOT use
on wood metal,
concrete, or
wood metal,
concrete, or
wood metal,
concrete,
wood, or vinyl
*
The high pressure spray from your pressure
washer is capable of causing damage to surfaces such as wood, glass,
automobile paint, auto striping and trim, and delicate objects such as
fl owers and shrubs. Before spraying, check the item to be cleaned to
assure yourself that it is strong enough to resist damage from the force
of the spray.
1. Press turret release button to
release turret.
2. Rotate turret to chosen nozzle.
3. Push turret onto nozzle and lock
into place.