Casio QV-R100 User Manual
Page 37
37
Recording Images and Videos
Your camera features a Self-timer and Burst which can be set in the Drive mode
function in the Record menu. The Self-timer allows you to take images after a pre-
defined delay. While burst lets you take consecutive shots. This function is only
available in recording still images. The Drive mode setting is automatically set to off
when you turn off the camera.
To set the Drive Mode
1.
From the Record menu, select Drive Mode.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
The table below shows the available Drive mode settings.
Setting the Drive Mode
Icon
Item
Description
Off
Captures an image without time delay.
10 Sec.
Sets a 10-second delay to capture image after pressing
the Shutter button.
2 Sec.
Sets a 2-second delay to capture image after pressing
the Shutter button.
Double
Performs delay and capture twice.
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the
image again.
Burst
Performs continuous shooting when the Shutter button
is pressed.
Stops shooting when the Shutter button is released.