Casio QV-3000EX/Ir - Manual (Page 75)

OTHER RECORDING FUNCTIONS
E-75
Picture
Quality
BASIC
Size
BASIC
Sharpness
Saturation
Contrast
Use this setting to control the quality of the image.
Fine / Normal / Economy
You can specify either of two image sizes in pixels.
2048 x 1536 / 1024 x 768
This setting specifies the sharpness of image
outlines.
Hard : Sharp outlines
Normal
Soft
: Soft outlines
This setting controls the intensity of colors.
High : Colors appear deeper.
Normal
Low
: Colors appear lighter.
This setting controls the difference between the light
areas and dark areas of the image. Contrast is not
applied in the Night Scene Mode.
High : Larger difference between light and dark.
Normal
Low
: Less difference between light and dark.
Functions 1
Drive
Mode
Metering
This setting specifies how the shutter operates.
Single : Allows recording of five images at an
interval of about 2 seconds.
Continuous : Allows recording of sequential
images at an interval of about 0.5
second while the shutter button is
held down.
• With any of the above settings, the interval may be
longer at slow shutter speeds.
This setting sets the metering method.
Multi : Takes readings across the
entire image, and provides
balanced exposure settings.
Center : Takes reading at the center of
the image.
Spot : Takes reading at a very limited
spot at the center of the image.
Peripheral lighting does not af-
fect this reading, so exposure
is based on the subject alone.