Part names and functions – Casio XW-DJ1 User Manual
Page 8
EN-6
General Guide
Part Names and Functions
No.
Controller:
Description:
1
P (Power) button
Turns power on or off.
2
EFFECT area
Controls the EFFECT function. See “About FX (Effects)” for more information.
3
AUTO LOOP area
Controls the AUTO LOOP function. See “About AUTO LOOP” for more information.
4R
4L
SCRATCH direction buttons
(SHIFT button)
Pressing the RIGHT SCRATCH button (4R) enables right-hand operation of the JOG
platter and left-hand operation of the crossfader. Pressing the LEFT SCRATCH button
(4L) enables left-hand operation of the JOG platter and right-hand operation of the
crossfader.
5R
5L
CROSSFADER
(FX PARAMETER)
Sliding the fader in the direction of the JOG platter fades in the sound of the deck
assigned by the DJ software. Sliding the 5L (the upper [5] controller in the illustration
above) changes effect parameters.
6
FILTER knob
Rotating to the right results in high pass filter (treble only output) function, while
rotating to the left results in low pass filter (bass only output) function.
7
MASTER OUT LEVEL knob
Adjusts the output level from MASTER OUT and speaker OUT.
8
HEADPHONE LEVEL knob
Adjusts the headphone output level.
9
DECK select buttons
Used to select the deck to be manipulated by the JOG platter.
10
CUE POINT area
Controls the CUE POINT function. See “About CUE POINT” for more information.
11
PLAY/PAUSE button
Starts or pauses playback.
12
SET CUE button
Sets the CUE POINT (START POINT).
13
CUE PLAY button
Jumps to the preset CUE POINT (START POINT) and starts playback.
14
SYNC button
Syncs with the speed (BPM) of the opposite side deck. Pressing this button during
playback syncs with BPM and timing.
15
JOG platter
Enables scratch and backspin operations with all the feel of a 7-inch record.
5
L
3
6
9
7
15
8
13
11
12
10
1
2
5
R
4
L
4
R
14
XWDJ1-ES-1A.indd 8
2014/11/28 17:15:46