Casio PCR-T265 - Manual (Page 9)

9
Part-1
Part-1 QUICK START OPERATION
E
QUICK START OPERATION Part-1
1. Initialization and loading memory protection battery
Important
You must initialize
the cash register
and install the
memory protection
batteries before you
can program the
cash register.
◗ To initialize the cash register
1. Set the mode switch to OFF.
2. Plug the power cord of the cash register into an AC outlet.
3. Load the memory protection batteries.
4. Set the Mode Switch to REG.
◗ To load the memory protection batteries
1. Open the platen arm.
2. Press down on the oval just behind the printer paper inlet, and slide the battery
compartment cover toward the back of the cash register.
3. Load 3 new SUM-3 (“AA”) type batteries into the compartment. Be sure that the plus
(+) and minus (–) ends of each battery are facing in the directions indicated by the
illustrations inside the battery compartment (Figure 1).
4. Slide the memory protection battery compartment cover back into place.
5. Replace the printer paper and printer cover.
REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE EVERY
YEAR.
(Figure 1)
2. To select the language
You can select the default printing language depending on the requirements in your area.
Default language is English.
Example:
Change the languge to Spanish.
1. Set the mode switch to PGM.
2. Press the following keys.
Select numbers from list A.
X>>> {
▲
Language selections
A
English
Z>>>
Spanish
X>>>
French
C>>>