Casio EX-Z3 2 - Manual (Page 20)

76
OTHER RECORDING FUNCTIONS
REC Mode Camera Settings
Specifying ISO Sensitivity
Use the following procedure to select the ISO sensitivity
setting that suits the type of image you are recording.
1.
In the REC mode, press [MENU].
2. Select the “REC” tab, select “ISO”, and then
press [
왘
].
3.
Use [
왖
] and [
왔
] to select the setting you want
and then press [SET].
To get this:
Automatic sensitivity selection
Conforms with ISO 50
Conforms with ISO 100
Conforms with ISO 200
Select this setting:
Auto
ISO 50
ISO 100
ISO 200
IMPORTANT!
• Note that the above histograms are shown for
illustrative purposes only. You may not be able to
achieve exactly the same shapes for particular
subjects.
• A centered histogram does not necessarily
guarantee optimum exposure. The recorded image
may be over-exposed or under-exposed, even
though its histogram is centered.
• You may not be able to achieve an optimum
histogram configuration due to the limitations of EV
shift.
• Use of the flash as well as certain shooting
conditions can cause the histogram to indicate
exposure that is different from the actual exposure of
the image when it was recorded.
• This histogram does not appear when you are using
Coupling Shot (page 69).