Elo TouchSystems ET1724L-8SWB-1-NL User Manual
Elo TouchSystems Monitors
This manual is related to the following products:
Table of contents
Document Outline
- Elo Entuitive Touchmonitor User Guide
- Table of Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Unpacking Your Touchmonitor
- Connecting Your Touchmonitor
- Video Input Pin Assignment
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the Serial Touch Driver for MS-DOS and Windows 3.1
- 1 Insert the CD-ROM in your computer’s CD-ROM drive.
- 2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM driv...
- 3 Type install and press Enter to start the installation.
- 4 Align the touchscreen.
- 1 Type INSTALL at the DOS prompt in the directory containing the driver install files.
- 2 INSTALL asks you to select the software to install. Then choose d:\EloDos_W31 from the displaye...
- 3 INSTALL also asks you for the paths to use during installation, or you may use its defaults. IN...
- Chapter 3 Operation
- Touchmonitor Controls
- Screen Adjustments
- 1 Push the MENU button once to display the OSD screen. The resolution and frequency are displayed...
- 2 Push the or button to select the item you want to adjust. The selected item will be highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 After making the adjustment, push the MENU button to return.
- 6 The display unit automatically saves the new settings in 1 second after your last adjustment an...
- Direct Access Buttons
- OSD Lock/Unlock
- Power Lock/Unlock
- 1 Press the MENU and Power button together for 2 or 3 seconds.
- 2 Press the MENU button and select the PL icon.
- 3 Select Yes.
- 4 Press the MENU button and select the OL icon.
- 5 Select No.
- 6 Power the monitor off then on.
- 7 Press the Power button. The status is Power lock on the user mode.
- 1 Press the MENU and Power button together for 4 or 5 seconds on the Power lock status.
- OSD and Power Lock/Unlock
- 1 Press the MENU and Power button together for 2 or 3 seconds.
- 2 Press the MENU button and select the PL icon.
- 3 Select Yes.
- 4 Power the monitor off then on.
- 5 Press the MENU and Power button. The status is OSD and Power lock on the user mode.
- 1 Press the MENU and Power button together for 4 or 5 seconds on the OSD and Power lock status.
- OSD Adjustments
- Chapter 4 Troubleshooting Tips
- Appendix A Native Resolution
- Appendix B Touchmonitor Safety
- Appendix C Technical Specifications
- Regulatory Information
- Index