Rinse aid, Activating/deactivating the rinse aid dispenser – Electrolux 60830 User Manual
Page 15
Operating Instructions
15
Rinse Aid
Rinse aid ensures thorough rinsing, spot and streak free drying of
dishes and glassware.
Rinse aid can be added in one of two ways:
• If you are using dishwasher detergent that already contains rinse aid, the
detergent including the rinse aid is put into the detergent compartment.
– In this case the dispensing of rinse aid from the dispenser must be
deactivated to avoid a double dosage.
• If you are using dishwasher detergent and rinse aid separately, the
rinse aid is to be put into the rinse aid dispenser.
– In this case the dispensing of rinse aid from the dispenser must be
activated.
– The amount of rinse aid to be dispensed must be set.
1
Only use rinse aid specifically designed for domestic dishwashers. Never
fill the rinse aid dispenser with any another substance (e.g. concen-
trated vinegar) or dishwasher cleaning agent. This would damage the
appliance.
Activating/deactivating the rinse aid dispenser
3
Some appliances are equipped with an additional 3 in 1 function.
If you use 3-in-1 dishwashing tablets and select the 3 in 1 function
together with the programme, the inflow of rinse aid does not have to
be cancelled (see ”3 in 1 function”).
0
1. Press the ON/OFF button.
The LED in the ON/OFF button will become illuminated.
3
If other indicators are also illuminated, this means that a programme has
been started. The programme must be cancelled (RESET):
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press the function buttons 1 and 2 simultaneously and keep them
pressed until the LED indicators for function buttons 1 and 3 flash.
3. Press function button 2 again.
The LED indicator for function button 2 will flash.