Electrolux TK SL5 E - Manual (Page 59)

E
E
F
F
G
G
7. Unscrew cover plates E from the front of the machine, rotate through 180°,
screw on the opposite side.
8. Unscrew door lock F, push down slightly and remove from the front of the
machine.
9. Disconnect cable connector from door lock F.
10. Press snap-in button G in and down, press cover down slightly and remove
from front of the machine.
11. Disconnect cable connector from cover G.
12. Change door lock F over to the opposite side, insert the cable connector and
screw down the door interlock.
13. On the other side, insert the cable connector in cover G, insert cover and allow
snap-in button to lock into place.
14. Insert loading door and hinges into recesses on the front of the machine and
screw down.
Note regarding contact protection:The machine is only secure for operations
again once all plastic parts have been inserted.
Special accessories
Intermediate installation kit for stacked washer and dryer:
installation electrolux 59