Emotiva DIFFERENTIAL REFERENCE XDA-1 - Manual (Page 16)

16
XDA-1 Technical Specifications
• Signal-to-Noise Ratio: > 105dB (A-Weighted)
• Frequency Response: 5Hz - 48kHz
•
THD+N: 0.001%
•
Ground Floor Noise Level: < 15uV
•
Nominal Output Voltage: 1V RMS
•
Peak Output Voltage: > 12VRMS (balanced)
•
Sample Rate: All standard resolutions are supported up to 192kHz
• Bit Depth: Standard bit depths up to 24Bit are supported at clock frequencies up to 192kHz
• Inputs: 2 Optical TOSLINK, 2 COAX Digital, 1 AES/EBU, 1 USB
• Outputs: 2 RCA (Unbalanced), 2 XLR (Balanced)
• Internal Volume Control: Digitally controlled precision attenuator
• Remote Control: Milled aluminum full function remote control
• I/V conversion: Burr Brown OPA-2134
• D/A conversion: high performance, multibit Sigma-Delta AD1955
Data Directed Scrambling with high jitter immunity, and an 8x Oversampling Digital Filter
• Fully Discrete Differential Reference™ Output Stage with fully independent balanced and unbalanced
drive stages
• Dimensions:
17" wide x 2.25" high (1.75" high without feet) x 14" deep