Emerson Radio HD8110 - Manual (Page 17)

16
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to play in any desired order.
NOTE: You can program a disc either during Playback or in Stop mode.
1.) Press the MEMORY button once. The
Program Number ‘01’ appears. The PROG
indicator and the the track number ‘00’ flash.
2.) Press the SKIP FWD or SKIP REV button to
select the first track to be programmed.
Example: Track 02.
3.) When the desired track number is flashing
in the display, press the MEMORY button
again to enter the desired track number in
Program Number 01.
The track number returns to “00” and the Program Number advances to “02”.
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the PLAY/PAUSE button to begin
programmed playback. The PROG indicator
remains in the display and the track display
stops flashing.
• Playback begins with the first track you programmed and continues until all
programmed tracks have been played, and then the player stops.
The programmed sequence will remain in the memory until the power shuts
off (approximately 30 seconds) or until the CD door is opened.
• If you press the MEMORY and PLAY/PAUSE buttons again before the power
shuts off, the programmed sequence will play again.
HD8110_052404.p65 25/5/2004, 12:21 16