Aquapur H5773 Lint Remover - Manual (Page 42)

GB/MT 44
© How to put it into operation
˽
Put the garment onto an even and clean surface.
˽
Take off the protective cap 8 .
˽
Switch the device on by sliding the ON / OFF switch 1
into position “I” and guide the gliding part 7 using
repeated, light, circular movements over the surface of
the item of clothing.
˽
Always make sure not to apply pressure. In that way the fur
and knots are shaven off and are kept in the fur container.
Note: We recommend that you do not operate the device
for more than about 2 minutes in one session.
© Cleaning
˽
Before cleaning the device always switch it off, pull off the
protective cap
8 and the slide attachment 7 , open the
battery compartment cover 3 and remove the battery 2
and the cleaning brush 4 from the battery compartment
cover.
ATTENTION: When removing fur remains be careful
not to damage the crop blades 6 .
˽
The fluff container 5 should be emptied regularly!
56765_aqu_Flusenentferner_Content_LB5.indd 44 02.03.11 11:07