How to put it into operation – Aquapur H5773 Lint Remover User Manual
Page 10
GB
10
j
Pull off the battery compartment cover
3
.
j
Insert a 1.5 V type C battery (see Fig. B).
Note: Insert the battery into the battery compartment and
ensure that the polarity is correct. To do so, please refer to
the picture in the battery compartment.
j
Close the battery compartment by pressing the battery
compartment cover
3
carefully on to the battery compart-
ment again until you hear and feel the two tabs engage.
Q
How to put it into operation
j
Put the garment onto an even and clean surface.
j
Take off the protective cap
8
.
j
Switch the device on by sliding the ON / OFF switch
1
into position “I” and guide the gliding part
7
using
repeated, light, circular movements over the surface of
the item of clothing.
j
Always make sure not to apply pressure. In that way the fur
and knots are shaven off and are kept in the fur container.
Note: We recommend that you do not operate the device
for more than about 2 minutes in one session.
89606_aqu_Fusselrasierer_Content_LB4.indd 10
22.02.13 09:40