ESPRIT ET288 - Manual (Page 12)

ET288/ET388 11
n STEP 4
This step is easier if you have someone else helping to hold the console while you connect
the wires. Connect the handlebar incline switch wire (55) on the left side to the mating
connector (38) of the console. Connect the handlebar speed switch wire (54) on the right
side to the mating connector (37) of the console and then connect the computer cable (50) to
the mating connector (48) of the console.
l
STEP 5
Secure the console with four 5/16 x 1/2 socket head bolts (130). Do not pinch the wires
when sliding the console onto the upright tubes.