Curtis SRCD682BT - Manual (Page 9)

Repeat playback modes (Repeat 1 / Repeat all)
Repeat the Current Track
During playback, press the REP/ PROG button until the icon is displayed to select the
current track/file to be repeated. The selected track/file will be repeated continuously.
Repeat All Tracks
During playback, press the REP/ PROG button until icon is displayed. All tracks/files
on the disc will be repeated continuously.
Programmed CD playback
Return to normal playback
Press the REP/ PROG button until NO repeat indicator is displayed. The normal playback
will be resumed.
This unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc
onto the CD compartment (without pressing the “PLAY/PAUSE” button)
1. Press REP/ PROG button once in the stop mode. “P01” will be shown on the display
and blinking.
2. Press the SKIP buttons to select the desired track to be programmed.
3. Press REP/ PROG button again to save the selected track/files.
4. Repeat steps 2-3 to program up to 20 tracks.
5. Press the PLAY/PAUSE button to play the programmed tracks after programming is
completed. The “PROG” icon will be displayed during the programmed playback.
6. To clear program and resume normal playback, press the STOP button twice during
playback, or open the CD door, or change to next mode to clear the programmed tracks.
Remark:
The unit can store up to 20 tracks in the programmable memories. During the
programmed playback, user can still select the “repeat 1 / repeat all” functions.
CD Operation-Continued
1
8