Curtis SRCD682BT - Manual (Page 7)

Switching On for the first time
Plug into AC power or install batteries by following instructions on the previous Power
Connection section. Press the
button to turn on the unit. The STANDBY indicator will
be lighted off. To turn the unit off, press the button again to turn the unit off.
Switching between different sources (CD / BLUETOOTH / Radio
/ AUX)
After turning on the unit, press and toggle FUNCTION button to switch different sound
sources.
Adjusting sound volume level
After turning on the unit, turn the VOLUME knob to adjust the level of sound volume.
Adjusting the rod antenna
The aerial should be extended to ensure good reception in both FM radio modes. It may be
necessary to adjust the position of the unit and /or aerial position to achieve the best signal
reception.
Bass booster
During music playback, press and toggle the BASS button to turn on/off the bass booster
for bass enhancement.
Main Operation
Caution:
There is a danger of explosion if batteries are replaced incorrectly.
Replace batteries with the same type and same brand only.
When the unit is intended for being unused for a long period of the time, press the
button to turn
OFF the unit and remove all batteries from the main unit.
6