Curtis SRCD827 - Manual (Page 8)

EN-7
AC power operation
If you wish to power your unit from an electrical outlet, find a location
that is close and within easy access of an outlet. Do not stretch the
cable-if you cannot reach a supply you should find an alternative
location for the system.
Connect the AC power cord into a suitable outlet and switch on at the
mains Plug if the socket has a switch.
*When not using the unit, it is recommended that the product is
completely disconnected at the AC mains socket.
Adjusting the sound
To adjust the sound turn the Volume Knob located on the Left side of
Your system.
Using Headphones
Plug your headphones into the headphones socket located in the middle
of your System on the Left hand side.
The sound will be heard through the headphones, not the speakers.
Please note: Headphones should have a 3.5mm diameter stereo plug and
an impedance of 8-32Ohms.
OFF OPERATION
There is no power switch on the unit. While the function knob is turned
to PHONO or TAPE position, it is in the STAND BY situation, when
connecting with power supply. There is still power consumption before
disconnecting the plug with power supply. In order to save energy and
keep safe, please make sure the disconnection of the power supply.