Curtis SRCD827 - Manual (Page 10)

EN-9
the other edge by pressing in the direction‘B’.
2. Push up in the direction‘C’until it locks at the tip.
Using the phono player
UNPACKING THE TURNTABLE
1) Carefully remove the unit from the styrofoam and take it out of the
plastic bag.
2) Open the lid and remove the tie-wrap by untwisting and gently sliding
it out from under the Tone Arm.
3) Remove packing material.
4) Remove the protective needle cover by gently pulling it toward the
front of the Unit.
Release the security Hook by gently pushing it to your left .
This will unlock the Tone Arm (26) from the Tone Arm Lock (25).
Use the security hook whenever moving the unit to another location.
Using the phono player
TURNTABLE OPERATION
1) Plug the unit into a standard AC120V~60HZ Outlet.
2) Set the speed control switch (24) to the desired speed (33,45,78rpm)
3) Open the FUNCTION KNOB (3), turn to PHONO position, then
use control Perch (23) to put up the arm. Or you can control it by
your hand, put it onto the disc gently.