Curtis SRCD268BT-PL - Manual (Page 8)

Switching On for the first time
Plug into AC power or install batteries by following instructions on the previous Power
C
the unit. The POWER indicator will be lighted off.
To turn the unit off, press the
button again to turn the unit off.
onnection section. The POWER indicator willl lit. Press the STAND BY button to turn on
Switching between different sources (AM/FM/CD/BLUETOOTH)
After turning on the unit, press and toggle FUNCTION switch to select different sound
sources.
Adjusting sound volume level
After turning on the unit, turn the VOLUME knob to adjust the level of sound volume.
Adjusting the rod antenna
The aerial should be extended to ensure good reception in both FM radio modes. It may be
necessary to adjust the position of the unit and /or aerial position to achieve the best signal
reception.
Main Operation
Caution:
There is a danger of explosion if batteries are replaced incorrectly.
Replace batteries with the same type and same brand only.
When the unit is intended for being unused for a long period of the time, press the
POWER button to turn OFF the unit and remove all batteries from the main unit
.
6
STAND BY